12 Jul
What Is Energy Drift And How Is It Impacting Your Business?
Posted on Jul 12, 2023
by D-ENERGi
Energy drift explained:
Energy drift is a phenomenon that occurs when the amount of energy consumed by a business or other organisation exceeds the amount of energy allocated for its usage. It can happen due to faulty equipment, inefficient use of resources, and incorrect pricing or billing practices. Energy drift has the potential to significantly increase operating costs and reduce profits. It can also have serious environmental ramifications, as excess energy use contributes to greenhouse gas emissions.
How energy drift occurs
Energy drift will occur when there are energy inefficiencies within your building. This could be due to general building design flaws, including errors within the construction process or smaller inefficiencies like faulty and malfunctioning electrical equipment.
Over time the more energy drift occurs, the greater impact this will have on the energy efficiency of your building. It has been estimated that within several years, energy drift can decrease the efficiency of your building’s systems by 10 to 30 percent. Since not all businesses have the funds or privilege to perfectly monitor and assess energy efficiency performance, it can often be difficult to manage the occurrence of energy drift. However, this does not mean there are no solutions to address energy drift and combat its effects on your business.
Solutions for energy drift
To prevent and address energy drift, it is important to conduct regular energy audits of your energy usage to identify areas of weakness or inefficiency. This can involve analysing energy bills for discrepancies, running diagnostic tests on equipment, and performing periodic maintenance on air conditioning and heating systems. Energy audits can be carried out in several ways, either by a member of your own team or by a third party auditor. More details on energy audits can be found here.
By using the energy audit you can identify the areas that are causing your building to experience energy drift and an increase in energy consumption. This could include the insulation of your building or your electrical systems requiring maintenance to improve the energy efficiency.
There are several management techniques that will also help you to reduce energy drift in your building. This includes the use of an energy management system, better control over your HVAC, and weatherstripping.
Keep a closer eye on your energy consumption with a smart meter for business
In order to pay closer attention to the energy you are using in real-time, the installation of a business smart meter is an effective solution. Providing a clear display of your usage and how much this will be costing you. Plus, the information the smart meter records is sent directly to your energy provider, ensuring your bills and charges are accurate.
For more information about business smart meters, visit our page here, or get in touch with our team to arrange an installation.
Fossil fuels as we most commonly know them are coal, oil and natural gas. Oil and natural gas are namely known for being located in underground reservoirs but they can also be found in other locations such as shale gas and tar sands. Previously these were considered to be too costly to excavate and make them commercially viable, it is only thanks to the advancements made over the last ten years in drilling technology that these can now be accessed and sold at a profit.
As with many countries Britain is a source of shale gas but this is an as yet untapped resource and yet one that is understandably becoming more and more appealing to businesses and the government. The North Sea oil rig is one of the main contributors to the British Economy and quite often the economy rises and falls with the output of these oil fields; the economy shrank by 0.3% in the final quarter of 2012 because of declining gas and oil output.
“Shale gas could be a new North Sea for Britain, creating tens of thousands of jobs, supporting our manufacturers and reducing gas imports.”
The above statement was made by Corin Taylor, Senior Economic Adviser and author of a new report from the IoD regarding the potential impact of fraking for shale gas on the British economy. Such statements will undoubtedly incite excitement in a government that is looking for an immediate solution to their fiscal woes.
The report cited government figures that estimate 76% of the UK’s gas would be imported by 2030 the cost of which would be around £15.6bn. per year. However, according to this report, if shale gas were to be aggressively pursued gas imports would be reduced to around 37% by 2030 at a total cost of around £7.5bn. per year.
The above figures are clearly an encouraging incentive and shale gas has been somewhat of a revolutionary natural resource in countries that have found themselves with an abundance of it. The two most hotly discussed examples can be found in Northern America. The USA is hoping to be nearly entirely self sufficient regarding energy thanks to their vast reserves of shale gas and Canada is looking for a major boom to it’s economy thanks to their recently discovered tar sands, also known as oil sands. However, what on the surface appears to be the answer to all our looming fears over the future of global energy production could potentially force climate change into an irreversible state.
The process by which shale gas is extracted is called ‘fraking’ and involves drilling a well to the depth at which the shale rock sits and then blasting the rock with water and chemicals. As the water and chemicals produce fissures in the rock natural gas is released and can subsequently be siphoned off and used as energy. One of the most commonly cited issues with frakking is that the chemicals used in the process can contaminate local water suppliers as only 50-70% of surplus water is recovered. However, these figures are regularly disputed and though there are examples of this, such as in Pennsylvania as outlined in this study, they appear to be isolated incidents and are yet to be corroborated by other communities located near frakking sites.
There are obvious benefits to excavating the shale gas resources, the economic boost alone is incredibly appealing, but surely this can only be seen as a desperate attempt to hold onto a system that will ultimately fail us. These resources can only ever be finite, and whilst they are available to be used their use will ultimately push climate change to such a degree that there is no stopping it and certainly no returning from it. We should see the dwindling supply of fossil fuels as a reason to pursue something new, to invest in renewable energy solutions that could potentially reverse the devastating impact that carbon emissions have had.
Read Article
What is P272? P27what? You aren’t alone in the dark about P272. P272 is regarded as one of the biggest shakeups to the business electricity market since deregulation. Sounds more like a character out of star wars, but here are some facts on P272, which we have put together hopefully jargon free. If you unsure on how P272 affects your business please do not hesitate to contact us for free on 0800 781 7626, we will be delighted to help you further. You may also like to view our infographic and visit our support page dedicated to the P272 OFGEM legislation.
The Facts – What Is P272
P272 is a new regulation which has been implemented by OFGEM. It affects the way suppliers settle electricity consumption for businesses with a specified energy use. Resulting in sites being changed to half hourly.
Remember, remember the 5th November… “Guy Fawkes?”. No, no… this is when the P272 migration began! The deadline for all sites to be settled to Half-Hourly is 1st April 2017. Don’t be fooled by the date, it really is 1st April! Also, don’t be put off by the 2017 threat – it’ll be here before you know it!
The settlement is being put in place in order for suppliers to balance the amount of energy being purchased from the Generators. The aim for P272 is to make the readings more accurate via the half hourly consumption. This will provide distributors with more understanding on electricity use. This results in networks ensuring they are sufficiently developed and maintained.
Ultimately, P272 helps you and your business manage and also use the energy smartly. It gives you the opportunity to see where and when you are consuming energy. Also, a more accurate settlement which could lead to better tariff rates… something nobody would say no to, agreed?
Now you (hopefully) have a little more understanding of P272 here is how to prepare:
Learn if your portfolio is affected.
Speak to your supplier, they will be more than happy to explore your options with you.
Select your Half-Hourly Meter and Data Collector.
If your business has a maximum demand electricity supply categorised by profile classes:
05 06 07 08
And you have an Automated Meter Reading meter of which is capable of HH data collection and remote programming. Just to let you know… 160,000 sites are affected so it is definitely worth double, maybe even triple checking!
“How do I check?!” I hear you say? Simple… you just check the S number at the top of your electricity bill to find out your sites profile class.
Believe it or not, P272 can be very beneficial for you and here’s why:
You receive accurate billing
It offers you the ability to avoid peak times of electricity use
It gives you an insight on your energy usage
It allows you to make room for an opportunity of improvement and efficiency
REMEMBER…
This is an OFGEM regulation affecting ALL maximum demand meters and ALL electricity suppliers equally. If you’re being advised P272 does not affect your business, please let us double check this for you.
Read Article